Menu
Back to Skills

Adjusting the trigger pull on a factory rifle for increased accuracy

How to adjust trigger pull on hunting rifle

Precision. It’s what we all strive for and, ultimately, leads to success during the fall. Getting to a high level of precision not only takes time, but it also takes knowledge of your weapon and a commitment to perfect practice.

I know a lot great rifle shooters; my dad has probably been the biggest influence on my level of dedication to accuracy and precision no matter what weapon I’m holding. Yet, anyone who is skilled at shooting has one thing in common and that is trigger pull control.

One of the best explanations of trigger pull was by my dad. He explained it to me in terms of the relation of how much the gun weighs to how much trigger pull you have. For example, if you have a lightweight gun that weighs 7 lbs and your trigger pull is set at 5 lbs, your trigger pull is over 70% of the weight of the rifle. This means that when you are applying the required pull to make your trigger break, you have an increased likelihood of making the gun move since you are almost pulling back the same weight as the gun.

The beauty of adjustable triggers

Let’s face it, stock rifles are meant to have a heavy trigger for safety reasons. No rifle manufacturer wants an accidental discharge, which means that their rifles are set up in the factory to have a heavy trigger. Fortunately, more and more rifle manufacturers are building their stock rifles with an adjustable trigger to accommodate those of us who want to tweak it to our own shooting abilities.

Adjustable triggers allow the user to manipulate the amount of force (pounds) it takes for the trigger to break and the shot to go off. A quality rifle doesn’t always need a new $250 trigger job. Instead, it may only need to be lightened in order for you to see greatly improved groups.

Why hunt with lower trigger poundage?

It’s all about accuracy. Rifle triggers are meant to be squeezed very slowly. Accurate and precise shot placement on an animal is extremely important so you shouldn’t rush the shot process and pull the trigger to make the gun go off. That will lead to your bullet impacting in a different place.

While shooting a rifle, you don't want to know when your rifle goes off. Just like in archery, anticipating the shot leads to flinching. Instead of pulling the trigger back suddenly, just gradually add pressure to the trigger while keeping your crosshairs on the animal. Eventually, the rifle will fire with a surprised break.

Heavy triggers can also cause you to flinch and are more difficult to achieve a clean break. Most factory triggers are set at around 4 lbs and ones that have an adjustable trigger usually have a range of 3 to 5 lbs. 

How to adjust your rifle trigger pull poundage
 

Tools needed for adjusting rifle trigger
* Note: Use an empty rifle cartridge when testing. 
 

Tools needed

Item Cost
2mm Allen Wrench NA
4mm Allen Wrench NA
Tipton Gun Vice* $49.99
Lyman Electronic
Digital Pull Gauge
$54.99
Acetone bottle $8.99
Q-tip NA
Nail Polish* NA
Empty rifle cartridge NA
Total $113.97


* Optional

Step 1

As always, ensure the gun is unloaded whenever you're working on it. I am adjusting the trigger on my Browning X-Bolt Hell’s Canyon Speed rifle so your particular setup may be a little different.
 

Checking the rifle trigger poundage from the factory
The stock trigger pull was 4 lbs. 2.2 oz. on my Browning X-Bolt.

I like to start off the process by first testing the stock trigger poundage. You'll want to use a very accurate spring or digital scale for trigger adjustments. I prefer to use a empty rifle casing in the chamber for test firing during this trigger process rather than dry firing the gun. I’m using a Lyman Electronic Digital Pull Gauge for determining the trigger pull weight. The scale is very simple to use. Simply activate the unit by pressing the “Ready” button. Next, place the black plastic roller just in front of the trigger, but do not touch it to the trigger. Now press the “Ready” button again; you’ll hear a loud beep that indicates the scale is ready.

Using a Lyman trigger pull guide

It’s very important to keep a steady hand when getting trigger pull readings and to keep the trigger hook parallel with the bore of the gun. This is done to prevent incorrect readings. Next, you'll pull the gauge slowly backwards until the trigger releases. The Lyman scale will show you the trigger pull in pounds and ounces.

The Lyman scale also automatically calculates an average pull reading. Just repeat the step at least five times and then push the “AVG” button.

Step 2

Getting ready to adjust rifle pull tension

Start by removing the magazine and unscrew the bottom two bolts. I prefer to flip the rifle over and place it on a vice for simplicity.

Step 3

Removing Browing X-bolt rifle trigger guard

Next, lift the metal trigger guard out of the stock.

Step 4

Finding the rifle trigger tension screw

The trigger adjustment screw is located just in front of the trigger. Depending on your rifle, the screw may have some sort of sealant on it. 

Continued below.

goHUNT INSIDER equals better hunting research

Adjusting a hunting rifle trigger tension screw

To increase the weight of the trigger pull, turn the adjustment screw in a clockwise direction using a 2mm Allen wrench. To decrease the weight of the trigger pull, turn the adjustment screw in a counterclockwise direction. Note: If the trigger pull is set too heavy, the trigger cannot be pulled and must be re-adjusted. Turn the screw counterclockwise until the trigger can be pulled.

Step 5

Finalizing Browning Xbolt rifle trigger pull

Now you will want to repeat the process you did in step one until you get the trigger pull that you desire. I prefer setting my hunting rifle up between 2.75 and 3 lbs. This poundage is light enough to prevent you from jerking the trigger, but also heavy enough so you can still feel the trigger when the temperatures drop and your hands are cold.

Keep in mind that the lightest trigger possible is not always best for hunting. Some people can shoot that way, but remember how much things change when you are in a hunting situation. If you're going with a 2 lb trigger, be sure to practice in rain, wind and cold conditions.

Using a Lyman trigger pull guide for average pull weight

The Lyman Digital Pull Gauge has a great averaging function on it. I did a series of five test pulls and then got an average trigger pull reading of 2 lbs 8.5 oz which I am very happy with. To ensure you like the feel of the trigger weight, you should do another round of practice shots with an empty rifle cartridge. I do this by laying prone with a rear bag supporting my rifle and sqeezing the the trigger to simulate a hunting situation. If you feel the trigger is too light or heavy, repeat the above steps.

Step 6

Applying acetone to clean rifle trigger adjustment screw

When you're finished making the adjustment, now you'll need to apply nail polish to the trigger adjustment screw threads. The purpose of the nail polish is to prevent the screw from moving over time. Nail polish is preferred over Loctite Threadlocker Blue or superglue. I start this process by taking a Q-tip and apply a small amount of acetone to clean the threads and surrounding areas before applying nail polish. If there's one thing I've learned over the years while painting my bow, tripods, or other hunting accessories, it's that preparation when painting is everything.

Applying nail polish to rifle trigger adjustment screw

Next apply a small amount of nail polish to the threads and surrounding area.

Nail polish applied to trigger adjustment screw

Step 7

Replace the trigger guard back in the stock and reinstall the trigger guard bolts snugly.

Your rifle is now ready for increased hunting accuracy. To finish up this process, it's best to do another round of practice shots with an empty rifle cartridge like you did in Step 5. Sometimes it might be better to put the rifle away and practice with the trigger again tomorrow. That way you are starting fresh and are not convinced that the trigger pull is perfect. A day can make a big difference. If you feel the trigger weight is off... head back a few steps, scrape away the nail polish and adjust the trigger weight again.

 

 

 

7 Comments

Log in or register to post comments.

Shane T. - posted 1 month ago on 08-22-2019 02:54:44 pm
Denver, CO
goHUNT INSIDER

Does adjusting the trigger void the gun warranty for a Winchester?

michael h. - posted 1 year ago on 06-18-2018 01:43:39 pm
Tijeras, NM
goHUNT INSIDER

Thanks Brady, I'll give that a try while I wait for my new sear spring to arrive.

Brady J. Miller
Brady M. - posted 1 year ago on 06-18-2018 01:30:46 pm
Las Vegas, NV
goHUNT Team

Hey Michael. Another trick is to take that adjustment screw down as far as it will go. Then leave it like that for 15 minutes to stress the spring out. Then loosen it and you should get a lower trigger pull poundage.

michael h. - posted 1 year ago on 06-18-2018 12:56:15 pm
Tijeras, NM
goHUNT INSIDER

Have the same rifle, backed the adjustment screw out as far as I could and still think the pull is way to hard. My finger just doesn't like this trigger.

scott.lewis60
Scott L. - posted 2 years ago on 01-29-2017 09:03:19 am
Mohave Co., Arizona
goHUNT INSIDER

Completely agree Brady. I've been using for some time the TC Dimension. I have it in 22-250, 308Win, and 300 Win Mag. I prefer my trigger's at a crisp 3.5 lbs. I love my Dimension and get 5 shot 1/2" groups with it using handloads. However, one of the frustrations I have with it is adjusting the trigger pull, which can be done, it's just a difficult screw to get to.

Ruben M G. - posted 2 years ago on 11-07-2016 07:50:58 pm

I'm on disability and have no money to sign up for free stuf but thanks for the awesome information God bless our guns.

Warren_Lacour
Warren L. - posted 2 years ago on 11-07-2016 05:38:16 am
Shelton, CT.

I will go by feel rather than poundage, thank you. good article.