Start to finish bow build video series — everything you need to know

If you picked up a new bow recently, or are looking to tweak your setup before the upcoming hunting season... this video series is for you! Trail Kreitzer knows his way around a bow and below is a six-part series on his step-by-step process for building, tuning a bow and sighting your bow in and building a sight tape. In this video series, Trail is building a Mathews Atlas but no matter the bow you shoot, the same techniques can be applied.

If you're getting ready to build a new bow setup, we have everything you need to get your bow dialed in at the GOHUNT Gear Shop. From arrows, nocks, inserts, vanes, and glue, all the way up to levels, jigs and presses. Also, don't forget about our premium arrow cutting service. Learn more here.

---

Part 1 - How to set nocking point and tying in a d-loop

In Part 1 of our Bow Build video series, Trail walks us through the first steps he takes when setting up a new bow. In this video he covers initial inspections, setting up his knocking point, and how to tie in a d-loop.

Products Featured in this Video:

• Last Chance Archery Bow Press

---

Part 2 — How to mount an arrow rest

In Part 2 of our Bow Build video series, Trail walks us through his second phase when setting up a new bow. He covers the tools and steps you'll need when mounting your arrow rest.

Products featured in this video:

• Hamskea Epsilon Arrow Rest
• Last Chance Archery Bow Press

---

Part 3 — How to install a peep sight

In Part 3 of our Bow Build video series, Trail moves into explaining the process he takes when installing a peep on a new bow.

Products featured in this video:

• Hamskea Epsilon Arrow Rest
• Hamskea Raptor Peep Housing
• Last Chance Archery Bow Press

---

Part 4 — How to mount stabilizers and bowsight

In Part 4 of our Bow Build series, Trail dives into his stabilizer, side-bar, and bow sight setup.

Products featured in this video:

• Shrewd 8 Degree Quick Disconnect
• Shrewd Atlas V-Bar Bracket
• AAE Mountain Series Stabilizer
• Axcel Landslyde Slider 5 Pin Sight
• Last Chance Archery Bow Press

---

Part 5 - How to tune your bow

In Part 5 of our Bow Build video series, Trail walks us through the process of getting his bow tuned and ready to shoot.

---

Part 6 - Bow sight in and building a sight tape

In this video, Trail dives into his on-range process of getting a bow sighted in. Once he's got this dialed, stay tuned as Trail walks us through how to build a sight tape on Archer's Advantage. These tips will simplify your sighting in process and get you shooting tight groups in no time!

Shop everything archery related here