





The three areas you can adjust on the Browning Vari-Tech rifle stock.


At the range, checking out fit after adjusting the Browning Vari-Tech rifle stock.
A rifle that doesn't fit you is fighting you before you ever press the trigger. Bad cheek weld, wrong length of pull, a grip angle that puts your trigger finger at a weird angle. All of that adds up to more felt recoil, slower target acquisition, and groups that open up right when you need them to stay tight. In the backcountry, where you might only get one shot at an animal you've hunted for days, that's not a small problem.
Browning built the Vari-Tech stock on the X-Bolt 2 platform to fix exactly this. It's a three-way adjustable stock that allows you to adjust the grip, comb height, and length of pull to fit you. These features let you tailor the rifle to your body instead of the other way around. I've spent a lot of time behind rifles, and I appreciate when someone can purchase a rifle and fit it to them without having to do a bunch of custom modifications or spend a bunch more money to swap things around. Most hunters buy a rifle off the rack and never touch the fit. With the Vari-Tech stock, there's no excuse not to.
Here's how to adjust all three points on the Browning Vari-Tech stock, why each one matters, and what to look for once you're behind the gun. You can check out the video version at the top of this article.
Fit isn't a "nice to have" feature of a rifle stock. In my opinion, it's the foundation for a repeatable, accurate shot.
The Vari-Tech stock lets you dial in all three without buying an aftermarket stock.
Tools needed:
X-Bolt 2 rifles with the Vari-Tech stocks ship with two interchangeable grip modules: a curved sporter-style grip and a vertical grip. Hunting models ship with the sporter grip installed and the vertical grip in the box (long-range and target models are the reverse). Swapping between them takes only a few minutes.
I prefer to use the vertical grip on my hunting rifles. It puts my trigger finger at a clean 90 degrees and keeps the rest of my hand relaxed instead of death-gripping the stock or reaching for it. That said, there's no wrong answer here; sporter versus vertical comes down to what lets you press the trigger the same way, every time.
Comb height is what gets your eye lined up behind the scope without any thought or forcing your face up or down to have a clear sight picture. If you've ever had to jam your cheek down onto the stock, or you're floating above it to find your sight picture, this is the fix.
The Vari-Tech comb gives you a full 1" of height adjustment.
For a quick check for correct comb height, shoulder the rifle with your eyes closed, then open them. If your eye lands dead-center in the scope without you having to move your head around, you're dialed in. If you're seeing a bunch of black all over when looking through the riflescope, adjust again.
Length of pull impacts a lot of things, especially when you have a length of pull that is too long or too short. Too long, and you might struggle to mount the rifle quickly or will be reaching too far to work the bolt cleanly and even stretching to make contact with the trigger. Too short, and you'll be crowding the riflescope, which will just be awkward and not that comfortable.
The Vari-Tech stock comes from the factory set at 13-5/8" length of pull and will most likely have two of the spacers already installed. The beauty of this system is the length of pull is adjustable in 1/4" increments across a full 1" of range (13-1/8" to 14-1/8") using four included spacers that stack inside the stock. And one note here is that they are not stacked between the pad and stock; rather, they are placed inside the stock, which keeps the lines clean. Here's how to change it:
To find your correct length of pull, you’ll measure from the center of the trigger to the back of the recoil pad while you're in your natural shooting position — hunting stance, not standing at attention. If you're bridging that gap with your neck or your elbow is jammed into your ribs, your LOP is off.
Every adjustment on the Vari-Tech stock should get confirmed at the range shooting rounds, not just dry-firing in your living room. With that said, I'm a big promoter of dry-fire practice, so do both! But definitely head to the range to confirm everything is perfect. Grip, comb height, and length of pull all interact and are related to how your rifle feels when you’re shooting. Change one, and it can shift how the others feel.
Shoot a few groups after each adjustment, and pay attention to:
The Vari-Tech stock is one of the simplest ways to turn an off-the-rack X-Bolt 2 into a rifle that's actually built for you, with no fancy gun work required. Grip, comb height, and length of pull all take minimal time to adjust with basic tools, and the payoff is a rifle that mounts faster, shoots more comfortably, and puts your eye and trigger finger in the same place every single time. Before your next hunt, take the time to dial in all three. It might be the cheapest accuracy upgrade you make all year.
Grip angle affects trigger control: how your finger meets the trigger and how consistently you can press it straight back. Some people like certain grip styles, and now you have the option to swap the grip between a sporter and vertical grip with the Vari-Tech stock.
Comb height controls your eye-to-scope alignment: If you don’t have the proper comb height, you're not going to have a consistent sight picture, especially with the taller optics and Picatinny rails most of us use now.
Length of pull is the distance from the trigger to the end of the recoil pad. Too long or too short, and your mechanics and your recoil management all suffer.
5/32 Allen wrench
Small Phillips screwdriver
2.5mm Allen wrench
Unload the rifle, remove the bottom metal and magazine, and I like to keep the action bolts organized by length to help when putting it back together. The front one (toward the barrel) is the shorter length, and the back one by the trigger is the longer one.
Lift the barreled action out of the stock, supporting the scope as you go.
Loosen the Phillips-head screw at the rear of the grip area (right below where the safety sits) and slide the grip off.
Slide the new grip in from the bottom, angle it into place, and hand-tighten the screw.
Reassemble everything back the way you took it off, torque the action screws to spec (Browning calls for 35 inch-pounds on the rifle I worked on), and torque evenly.
With the rifle unloaded and the bolt removed, locate the adjustment access point near the top of the comb, on the back of the recoil pad. (It’s going to be the uppermost hole on the recoil pad).
Using a 2.5mm hex wrench, reach in and loosen the internal mechanism that locks the comb in place. You’ll loosen this about 20 turns.
Once loose, slide the comb backward to free it, and now you can adjust it up or down to the height you need. Then push it back forward to lock it in place. Put the rifle up to your face and check where your eye naturally lands relative to the back of the riflescope.
Once you've found the height that gives you an instant, centered sight picture with your head in a relaxed, neutral position, lock the comb back down with the hex wrench.
Test the height a few more times to confirm the height is repeatable before you call it good.
As always, make sure the rifle is unloaded and the bolt removed. Then remove the recoil pad; there are two Phillips-head screw securing it that you will need to remove. If you’re looking at the recoil pad from the top down, it will be the second hole down from the top and then the bottom hole. You’ll need to remove both of those screws.
Pull off the recoil pad.
There will be two more screws you will need to remove behind the recoil pad. So use the same Phillips-head screwdriver to remove those.
Slide the back part of the stock off.
You’ll add or remove spacers into this section of the stock. On the front of the spacers, it will say “This side forward.” And you’ll want to orient them that way as you stack the spacers to adjust your length of pull.
Add or remove spacers to lengthen or shorten the length of pull.
Reattach the recoil pad and tighten the screws evenly.
How quickly and consistently you find your sight picture
Whether your trigger finger is landing the same way shot to shot
Felt recoil and where the rifle wants to go after the shot breaks